CIPA 93443 EVO Formance Alfas Maximum Intensity H4 Ultra White Halogen Bulbs - Twin Pack

EVO Formance Alfas Maximum Intensity replacement bulbs are the best approximation to a full HID lighting system. Alfas can be installed on any vehicle without modifications, complications, or the excessive costs of an HID system. Their maximum illumination and "Ultra-White" color is due to the quality of materials, the unique combination of gases, and a special tungsten filament that is made in Japan. Alfas emit a pure white light that is rated at 5500K. Standard headlight bulbs emit a yellow light between 2700K - 3300K. Alfas Maximum Intensity bulbs emit between 2100 lm - 2300 lm of light. Standard headlight bulbs emit between 1000 lm - 1100 lm of light. The bulbs are constructed using quartz. Quartz is more transparent than normal glass. This results in more light emission and can be subjected to higher temperatures without shattering. Alfas operate using a 12 volt power supply and consume about 85 watts of power. The Alfas wiring harness uses heat resistant 14 gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfas bulb. They also use a unique ceramic socket that helps isolate heat so there is no risk of an Alfas bulb damaging the vehicles existing electrical installations. Simply remove your existing bulb and install the Alfas bulb. Experience plug and play brightness that will not melt or damage your vehicle s existing components. Don t Change… Evolve

Why Choose Alfas?

Choose Alfas if you want MAXIMUM illumination and an "Ultra-White" Color without the complications of installing an HID System. When it comes to color, brightness, longevity, safety, convenience, affordability, and customization options - Alfas Maximum Intensity s are unsurpassed. New technology = More light, less power, and a safer installation.

Color

The "Ultra-White" color of the Alfas Maximum Intensity line have been fine-tuned by experimenting with different combinations of gases, bulb finishes and specialized filaments. Alfas emit a pure white light that is rated at 5500K. They were designed to blend perfectly with the white color produced by the HID systems found in the high-end luxury vehicles and are the best approximation to a full HID lighting system.

Brightness

OE/Factory bulbs vs. Alfas bulbs

Alfas Maximum Intensity bulbs offer brightness levels that will exceed the vehicle s factory installed OEM halogen bulbs. This brightness level is achieved by using a high quality tungsten filament from Japan that safely emits upwards of 120 watts of light. Alfas bulbs also have a transparent top. By removing the paint at the top of the bulb 10% more light is emitted. Alfas are also manufactured using quartz glass. Quartz is more transparent than normal glass. This results in even more light emission from the bulbs. The Alfas wiring harness uses heat resistant 14 Gauge wires. This helps reduce any resistance between the vehicles existing socket and the Alfa bulb. The result is even more of an increase in brightness. Standard OE bulbs output about 1000 lumens of light, whereas the Alfas Maximum Intensity s are capable of outputting upwards of 2300 lumens.

Longevity

Alfas Maximum Intensity bulbs have a life expectancy of around 800 hours. 800 hours of bulb use exceeds any aftermarket high performance bulb on the market and is comparable to the life expectancy of stock bulbs. This long life expectancy is achieved by limiting power consumption and therefore controlling the heat of the filament. The less amount of heat a filament endures the longer it will burn with light. Alfas also use a special combination of pressurized Xenon, Halogen and Argon. When the filament excites the gas, it results in increased brightness without an increase in heat. This helps increase the life of the filament. Alfas Maximum Intensity s are also backed by a 30 day limited warranty.

Safety

Alfas Maximum Intensity s are able to maintain safe heat levels because they are limited to drawing a maximum of 85 watts of power. Alfas utilize special tungsten filaments that were specially designed for Alfa specifications. These are filaments that emit more light with comparatively less heat. This special filament allows the bulbs to shine brighter - not hotter. The quartz glass that is used can also be subjected to higher temperatures without shattering. Removing the paint on the top of the bulbs also resulted in a significant reduction in the heat produced. The 14 gauge wires that reduces resistance also reduces heat transfer. In addition, Alfas use a unique ceramic socket that helps isolate heat so there is no risk of an Alfa bulb damaging the vehicles existing electrical installations. Alfas will not melt a vehicles original light socket. The result is a safe product for the consumer and their vehicle.

Convenience

Alfas install directly into the vehicles existing electrical system with no modifications. They are 100% "Plug and Play". Simply remove the existing bulbs and plug in the Alfas Maximum Intensity bulbs. No wiring, no calibration, and no ballast is required to obtain an authentic HID look. Bulbs install cleanly and safely in just seconds.

Affordability

HID conversion kits aren t only illegal in the US, but they are also very expensive and complicated. High performance halogen bulbs are not nearly as expensive as an HID conversion kit, but they are not exactly affordable either given the average life span of the average "high performance" aftermarket bulb. EVO Formance is the first manufacturer that is able to offer high quality performance style lighting at an affordable price. EVO s innovative approach in the manufacturing of the EVO Formance line will not only change the high performance lighting industry - it will make it evolve.

Complete Customization

EVO Formance offers an entire line of lighting accessory products in the same "Ultra-White" color allowing for complete customization of your vehicle without mismatching or clashing colors. Some accessories available include EVO Eyes, EyeBrows, Dash Lights, Dome lights, side marker lights, reverse lights, multi-use lights, light strips, strobes and much more. In addition, the colors of EVO lighting also blend perfectly with HID systems.